Applications | Kernel Grip furniture hardware
Kernel Grip, hardware for furniture and manufactureKernel Grip

Applications

Sheet A · Where the parts go

Anywhere a bolt needs a strong, reusable thread in wood, ply or board, and anywhere a lid has to lift or a backrest has to move. Pick your industry to see the typical fixings, the parts that go into it and the T-nut sizes to start with.

Beds, bases & headboardsA01

Beds, bases & headboards

Bed frames are built, flat-packed, delivered and rebuilt at home. T-nuts give rails and headboards a metal thread that survives being taken apart again and again; lift mechanisms and struts turn a base into storage.

Typical fixings
  • Headboard to side-rail joints
  • Ottoman and storage bases
  • Buttoned headboards
T-nut sizes
M6×12 · M6×16 · M8×17
Ask for samples
Upholstery & furnitureA02

Upholstery & furniture

Sofa and chair legs usually go on after upholstering, or in the customer's home. A T-nut in the frame rail takes the leg bolt cleanly every time, and a ratchet backrest makes a fixed sofa adjustable.

Typical fixings
  • Sofa and chair feet
  • Adjustable backrests
  • Chesterfield and deep buttoning
T-nut sizes
M6×12 · M6×16 · M8×17
Ask for samples
Contract & commercial seatingA03

Contract & commercial seating

Booths, banquettes and auditorium seating are fitted on site and serviced for years. T-nuts let fitters bolt sections together and swap damaged units without rebuilding the frame.

Typical fixings
  • Booth and banquette sections
  • Floor and wall fixings
  • Buttoned back panels
T-nut sizes
M6×16 · M8×17
Ask for samples
Climbing wallsA04

Climbing walls

Climbing walls are plywood panels with a grid of T-nuts on the back, so holds can be bolted on and moved for new routes. Holds usually take M10 bolts, so we quote these as a custom size.

Typical fixings
  • Hold-mounting grids
  • Volumes and features
  • Home and training boards
T-nut sizes
Custom size to your spec
Ask for samples
Speaker cabinetsA05

Speaker cabinets

Drivers are bolted into the baffle and may need to come out for repair. A T-nut behind each mounting hole stops the screws chewing through MDF or ply.

Typical fixings
  • Driver mounting on baffles
  • Rear panels and handles
  • Rigging hardware
T-nut sizes
M6×9 · M6×12
Ask for samples
Flight casesA06

Flight cases

Touring cases are loaded and knocked about every week. T-nuts give a lasting thread for castors, internal racks, dividers and removable lids.

Typical fixings
  • Castor plates
  • Rack rails and dividers
  • Removable lids and panels
T-nut sizes
M6×9 · M6×12
Ask for samples
Skate rampsA07

Skate ramps

Wooden ramps take heavy, repeated impact. T-nuts let you bolt coping, transitions and surface sheets on firmly and replace worn parts.

Typical fixings
  • Coping and deck fixings
  • Transition and frame joints
  • Replaceable riding surfaces
T-nut sizes
M6×16 · M8×17
Ask for samples
PlaygroundsA08

Playgrounds

Timber play equipment is often supplied as a kit and assembled on site. T-nuts give strong, tidy bolted joints for platforms, panels and play elements.

Typical fixings
  • Platform and deck panels
  • Slide and panel mounts
  • Kit assembly joints
T-nut sizes
M6×16 · M8×17
Ask for samples
Campervan & van conversionsA09

Campervan & van conversions

Van furniture has to be fitted, removed and adjusted in a tight space and cope with road vibration. T-nuts make removable joints in ply; gas struts hold up bed lids and locker doors.

Typical fixings
  • Bed and seat frames
  • Cabinets and worktops
  • Lift-up beds and lockers
T-nut sizes
M6×9 · M6×12 · M6×16
Ask for samples
ShopfittingA10

Shopfitting

Shop fixtures are installed fast and changed every season. T-nuts let fitters bolt counters, shelving and display units together and take them down again without damage.

Typical fixings
  • Counters and gondolas
  • Shelving and slatwall
  • Display plinths
T-nut sizes
M6×12 · M6×16
Ask for samples
Exhibition standsA11

Exhibition stands

Stands are built, broken down and shipped for the next show. A metal thread in every panel joint means the stand goes back together just as tight each time.

Typical fixings
  • Demountable wall panels
  • Counters and plinths
  • Graphic and screen mounts
T-nut sizes
M6×12 · M8×17
Ask for samples
School furnitureA12

School furniture

Classroom furniture is used hard and repaired often. T-nuts keep legs, frames and tops bolted tight and let schools replace one broken part instead of the whole desk.

Typical fixings
  • Desk and table legs
  • Chair frames
  • Storage units
T-nut sizes
M6×12 · M6×16
Ask for samples
Sports equipmentA13

Sports equipment

Gym and sports equipment made from timber or board carries real loads. T-nuts give a strong bolted fixing for mounts, frames and adjustable parts.

Typical fixings
  • Wall-mounted rigs and bars
  • Plyo boxes and benches
  • Adjustable parts
T-nut sizes
M6×16 · M8×17
Ask for samples

Photos: Unsplash · Sizes are a starting point; confirm with samples in your own material

Not sure what fits?

Tell us your panel, bolt and product. We will suggest the parts and send free samples to test on your own line.

Request a quote